Chapter 565 Vacuum electron beam welding technology
For Vorontsov, it would be better if he could establish a joint venture with Torch Group like C.B. Ferrari did, but he could also accept continuing to exchange technology for technology.
So he nodded, recognizing the cooperation method proposed by Chang Haonan:
“So, what exchange conditions is Mr. Chang going to offer this time?”
Chang Haonan didn't waste much time and directly stated the requirements:
“I heard that at the Kazan Aviation Factory, there is a vacuum electron beam welding production line, which is the key technology and equipment provided by the Kolomna Factory?”
Vorontsov was taken aback, probably because he didn't expect that the other party would know these details so clearly.
“Yes, but that production line has not been put into use since 1991, so its current condition is average. More importantly, many relevant technical personnel have transferred jobs or even left completely.”
Colomna's vacuum electron beam welding production line is used to weld large-size titanium alloys or lithium aluminum alloys.
Specifically in the Soviet era, only the central main spar of Figure 160 and An 124/225 could be used.
After the disintegration of the alliance, no new aircraft were built for these three models, and the few aircraft that rolled off the production line were all assembled using existing parts.
First, he changed his career directly and used it to produce some pressure vessels, such as rocket fuel tanks.
Later, I managed to survive until Tu 160M resumed production, and then returned to my old business.
The manufacturing and installation of vacuum electron beam welding equipment are extremely complex, and it is difficult to dismantle them, transport them thousands of miles to China, and then reassemble them.
Chang Haonan waved his hands and said it didn't matter:
“We have cooperated so many times and are considered old friends. It doesn't hurt if I suffer a little loss this time.”
But what Chang Haonan wanted was not that production line.
Through Project No. 11 and the multi-arc ion plating production line, Shengjing has cultivated a group of talents who are familiar with Soviet technology and understand Russian.
In the original timeline, the equipment of the Kazan factory was reactivated after not being idle for too many years.
So, it is better to consider building a new one directly.
Vorontsov said to you that you are very kind. If you really want to talk about these two technologies, they cannot be considered to be of the same order of magnitude.
Chang Haonan certainly knows this.
The other person nodded.
“So, we are also prepared to show some new sincerity.”
As a result, the production line naturally fell into disuse.
Furthermore, Torch Group is developing rapidly now. Even if some technical obstacles need to be tackled again, it should not waste too long.
“It doesn't matter, as long as the technical information is there.”
Vorontsov was a little uncomfortable when he choked on his words, but it was hard to show it at this time, so he had to signal Chang Haonan to continue.
Even if Figure 160 is not available, this thing will be useful in the future.
After contacting 601 during Project 11, Sukhoi quickly introduced this numerical calculation software, and was pleasantly surprised to find that it had a very high degree of matching with the modeling software KOMPAS-3D they developed.
But since he would make this request, he had already planned it.
“Mr. Vorontsov should have heard of our group's TORCH Multiphysics software?”
So he saw exactly when Vorontsov was about to speak, and pushed back his words first:
“Of course, just such an exchange is still a little unfair.”
“Actually, we are developing a version with more functions and stronger capabilities, and the current plan is to only provide it to a small number of users who have a deep relationship with our group.”
“The only regret is that because this new version of the algorithm is special, it runs very inefficiently on general supercomputers…”
“Fortunately, we and Sugon Group have developed new equipment specifically for these special algorithms, namely the Sugon-T series computers, which can solve this problem to a certain extent and achieve high-precision, high-efficiency, and multi-degree-of-freedom calculations…”
The so-called new version mentioned by Chang Haonan is naturally the software and hardware bundling sales strategy that he discussed with Academician Li Jie at the National Science and Technology Awards dinner.
It's just that he said it in a different way, and it became a bargaining chip. What is making cards in the void.jpg
Although Vorontsov on the opposite side has had a lot of dealings with Chinese people, he still clearly lacks resistance to this kind of rhetoric.
After some thought, he tentatively agreed to this exchange condition.
Of course, he can only be regarded as a middleman, and ultimately requires formal signature authorization from the Kolomna factory.
However, judging from past experience, projects approved by import and export companies are rarely rejected.
So, basically they are inseparable.
After finishing the PY transaction with Vorontsov, Chang Haonan returned to the workshop.
Those technicians from brother units are still surrounding the multi-arc ion plating production line, discussing each other word by word.
Seeing Chang Haonan reappear, everyone stepped forward and surrounded him.
“Mr. Chang, we just discussed it and now we have a proposal. I would like to hear your opinion.”
One of the older ones became the speaker and said to Chang Haonan:
“I heard from Mr. Zhong Shihong before that this production line will not be able to arrange formal mass production tasks in Liming Factory for a while. At present, it will only carry out some technical adaptation work.”
“It just so happens that several of our companies have projects that urgently need this kind of high-stability coating technology, and we really can't wait until the subsequent production lines are completed and put into production.”
“So, during this period, can we pay for it and let Liming Factory help us produce some samples in the form of an order, which can at least be used for testing?”
Those who can stand here are all veteran comrades with certain experience in the military industry system.
From the acceptance process just now, it is not difficult to see that although Chang Haonan is not technically from Liming Factory, he has absolute say.
As long as he nodded, it wouldn't be a big problem.
After all, this production line is completely prepared for the turbofan 10 project.
It will still take some time before the turbofan 10 is finalized and transferred to mass production, or even small batch trial production.
“It's okay.”
Chang Haonan agreed to the other party's request after some thought.
In any case, workers at Liming Factory also need to familiarize themselves with the production line. Rather than letting them practice directly with unused parts, they might as well help their brother units solve some practical problems.
But then, he added:
“However, multi-arc ion plating is not a universal process. Please report the types of workpieces and coating materials that need to be coated and let the engineers here review them. If they pass, you can just place the order directly after you go back.”
“It's easy to say, we are just preparing to chromium plate the inner bore of the gun barrel, which is the most common coating requirement..."
The old engineer who just spoke said immediately.
Looks like he should be from the Ordnance Industry Group.
“We are making gears for a gearbox. The coating is the same as the demonstration just now, which is titanium nitride, but it does not require such a high binding energy..."
“Plexiglas for aviation needs to be plated with indium tin oxide on the surface…”
“Engine piston, molybdenum disulfide plated…”
Chang Haonan was a little dizzy at the sound of voices everywhere, and it took him a while to finally send these overly enthusiastic and excited technicians to the section chief responsible for this ion plating production line.
However, he did not leave the workshop immediately. Instead, he quietly watched the number of projects listed on the paper increase little by little.
Then put on the other side.
Put on a new piece of paper…
Perhaps, this is the scene that I expected to see when I was just reborn.
(End of this chapter)
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|