The Military-industrial Scientific Research System of the Academic Master Chapter 455

Chapter 455: Large-scale die forging manufacturing research team (10,000 per day, please give me your monthly vote!))

There are only three colleges and universities under the Ministry of Machinery Industry, so there is actually nothing to discuss.

 In the end, everyone unanimously decided to bring Luzhou University of Technology under the jurisdiction of the Science and Technology Commission.

 In addition to the need to set up a supporting institution in Luzhou, another important point is that the vehicle engineering major of this school has certain strength.

  but not particularly powerful.

 When I study vehicle engineering in China these days, I really don't know what I can do after I graduate.

 The best position that a joint venture can provide is a workshop engineer, while domestic companies...

 It's okay not to say it.

 When the joint R&D center between Nanjing Automobile and Fiat is established, the situation may improve slightly, but at least there is really no future at present.

 Tanks and armored vehicles are a way out, but what was the concept in 1997?

The 96A and 99 have not yet been released. The second-generation 88A/B and the earlier 59/69 tanks have been discontinued. The number of whiteboard 96 tanks is scarce. The entire armored industry production capacity of China relies on the 86 and 92 infantry fighting vehicles. maintained.

  The People's Liberation Army cannot equip a few of its own, and if it is exported, it cannot compete with the large number of T72 and BMP/BTR that were almost sold at scrap prices after the collapse of the Soviet Union...

 In short, it is not effective at all.

 Those who are a little capable will definitely go abroad.

 In this way, retaining a group of mid-to-upper-level mainstays in the country is a more realistic choice.

 There is already the Kyung Seong University of Science and Technology in the north, and a seedling can be left in the south.

“Then let's settle it like this for the time being. Then I can apply to it and it should be fine.”

Ding Gaoheng's final decision also means that this topic has come to an end.

Of course, in principle, when allocating colleges and universities affiliated with the Ministry of Machinery Industry, you still need to communicate with them and the Ministry of Education.

 But Luzhou University of Technology is not even 211 at this time (it was only selected into the second batch in 2005), so not many people will pay attention to it, and the problem is not big.

“Director, have you considered seeking the authority of the Ministry of Machinery Industry to formulate industrial policies?”

After a brief silence, the director of the Policy and Regulations Department brought up a slightly sensitive topic.

Although industrial policies in general are formulated by the State Planning Commission, the Ministry of Machinery Industry can still provide guidance on specific implementation directions. If it can be obtained, it will obviously be beneficial to the Policy and Regulation Department and himself.

 Of course, it also applies to the Commission of Science, Technology and Industry for National Defense.

However, the impact involved in this kind of thing is much greater than that of the school just now, so he can only say that he is "fighting for it."

 On this issue, everyone obviously needs to be much more cautious. About half a minute passed and no one spoke again.

 “I think it's better not to be too greedy for perfection.”

 In the end, Ding Gaoheng had to express his position:

“Industrial policy formulation is inherently sensitive, and it is also the main target of attacks by some people who claim that the degree of marketization is insufficient. At least until the WTO accession is completely finalized, it will be a hot potato for anyone who takes it.”

 Although he did not make it clear, it is obvious that the "some people" he mentioned are not Americans.

 Otherwise, just say it and be done with it.

The matter has reached this point, and the director of the Policy and Regulations Department also knows that this matter is definitely out of the question.

However, Ding Gaoheng added another sentence:

"Of course, there is no need to be too pessimistic. Although our Equipment Industry Department does not have this authority on the surface, as Xiao Chang said just now, we can still do a lot of things by relying on projects to lead the way and using our skills. "

There are explicit and implicit authority. The former is better, but the latter is not necessarily worse.

The twists and turns are complicated, but everyone who can sit here is an experienced person, so there is no need for Ding Gaoheng to say more.

And he just said, "before the matter of joining the WTO is completely finalized."

Who can say for sure what will happen after that.

At this point, the affairs of the Equipment Industry Department have been basically settled.

 As for the specific organizational structure and staff composition, it is not something that can be directly determined at the level of the Science and Technology and Industry Committee.

“Finally, there is one more thing.” Ding Gaoheng put down the pen in his hand and his expression became much more relaxed:

“Xiao Chang, the Jiangcheng Heavy Machine Tool Factory you visited last time has been basically taken over by the Ordnance Corporation.”

Chang Haonan, who originally thought it had nothing to do with him, suddenly became energetic:

"So fast? Then the forging press project is approved..."

  If the heavy-duty die forging press project is approved, it will definitely be the largest project in China's equipment manufacturing industry in the entire 1990s. It is something that will be recorded in history in the future, so he is naturally very concerned about it.

 Selecting the equipment in Jiangcheng was also based on the industrial base and transportation convenience here.

 The nearly 70,000-ton heavy-duty forging press must contain many large-sized components, both in its own construction process and in the products produced in the future.

In the previous life, China built an 80,000-ton die forging press more than ten years ago, and the land transportation conditions are no longer the same. It doesn't matter if we choose Jingcheng, Sichuan Province, but Jingcheng Erzhong itself has not yet developed at this time, and there are many things Water transport, even inland water transport, is still more convenient.

  If additional roads need to be built for the die forging press, it will inevitably affect the progress.

Ding Gaoheng naturally knew what he was thinking and raised his hand to indicate not to worry:

"It's just received at the moment. According to your previous request, in order to ensure surprise, we directly sent people to carry out a surprise attack without giving them a chance to destroy the equipment and evidence. The factory director and some important people were also controlled. , But Jiang Zhong's matter involves a lot, and the production has been damaged, so it will definitely not be possible to restart production immediately. "

"For the die forging press project, you can first ask the System Engineering Department to allocate a sum of money and bring together the core team you want to do some pre-research. It is best to wait until the Equipment Industry Department is established early next year to formally establish the project, so that the whole process can be smooth. It's easier for us to control it.”

 Structure adjustments at the ministries and commissions level are of course not just adjustments. They must be approved by the National People's Congress, which will be early next year at the earliest.

 The Second Department of Systems Engineering is responsible for the construction of nuclear power and weapons industries, and is considered the most relevant department under the existing structure.

Chang Haonan is not in a hurry to formally establish the project. As long as he has money and someone can work for him, it will be fine. Anyway, the design work on the turbofan 10 has just started, and it happens to be a busy time.

"fair enough."

Chang Haonan slightly adjusted his sitting posture:

“It's better to conduct preliminary research in the name of 'Large Die Forging Manufacturing Process Development' and incorporate it into the Seiko Plan, so that I can step in and control it.”

Even though Chang Haonan is at least twenty years younger than everyone here, when he said that he wanted to intervene to control the overall situation, no one even felt that it was against the rules.

Ding Gaoheng nodded directly:

“Okay, please report this matter to the Second System Engineering Department after the meeting, and I will take care of the money issue.”

In the first half of this year alone, the profits and taxes paid by the Aviation Industry Corporation were more than five times that of the whole of last year. Although the money was not directly handed over to the Science and Technology Commission, with such results, when Ding Gaoheng wanted to allocate funds Definitely more confident.

 “Understood, I'll do it as soon as possible.”

Lan Xinzhi, who was recording on the side, nodded obediently.

“Then if you have nothing else to add, we will adjourn the meeting!”

 As a leader, the most satisfying thing about Ding Gaoheng and Chang Haonan is that he does not procrastinate in meetings.

 The group of people filed out of the conference room one after another.

“Xiao Chang, I heard from comrades from the Ministry of Machinery Industry that you have recently made some big moves in machinery manufacturing?”

Ding Gaoheng has been waiting at the door for Chang Haonan to come out.

"As for the bearings I told you before, I have helped the three major bearing groups and two special steel companies solve some technical problems. If nothing else happens, the new bearings may soon be installed and tested on the turbofan 9. ”

Chang Haonan replied:

“With a business as big as this company's, it's definitely not possible to rely solely on aircraft engine bearings, so it must apply its technology to other fields…”

 The two of them walked down the stairs side by side, talking to each other.

 This scene made Director Zhou of the System Engineering Department 3's eyes widen when he saw it from behind—

 The two of them once had a relationship.

Just a year ago, she thought about letting Chang Haonan get some experience, and then transfer him to work under her once there was an opportunity.

As a result, he is now chatting and laughing directly with Ding Gaoheng?

 And it seemed that he just came out of the small conference room upstairs?

This shows that Chang Haonan, an outsider, went in and held an internal department meeting that even her department-level leaders could not participate in...

 Can you be reasonable?

 (End of this chapter)

Chapter end