Chapter 348 Jiangcheng Heavy Machine Tool Factory
“To be honest, Director, you really need some help from the organization.”
At the critical moment of the key project, Chang Haonan will naturally not be polite.
"Manpower and funding are all necessary conditions, so I won't mention them additionally. In addition, the first step is to assign the research and development and production tasks of the die forging press to a company, and it must be a reliable and combat-effective company. On the one hand, it is easier for enterprises to establish projects, and on the other hand, the equipment can be put into production quickly after completion. "
That is, he dared to make requests in this way.
On the one hand, it is the trust of the Science and Technology Commission in him, and on the other hand, Chang Haonan is confident in his efficiency in using funds and promoting projects.
Sure enough, Huai Guomo just nodded, then took out his notebook and pen to record it.
After that, he raised his head and said:
"It's okay to be affiliated with a research institute or company, but Xiao Chang, I have to explain to you that our Science and Technology Commission does not have much technical strength for machine tool research and development, and they are all scattered under various groups. Most of them can only handle small things such as machine tool application and maintenance, and may not be too familiar with heavy equipment such as die forging presses.”
"Among them, only the Ordnance Industry Corporation is relatively powerful. They have a Jiangcheng Heavy Machine Tool Factory, which was one of the 156 key projects aided by the Soviet Union. Up to now, it has produced about 5,000 units of various processing equipment. In the past, it also supplied I have exported a lot from friendly countries, so I have some basic knowledge..."
Chang Haonan didn't know much about the situation in Hubei Province. Before his rebirth, he vaguely remembered that Jiangzhong had a pretty good market share in shipbuilding and wind power, so he naturally had no objections:
"As long as you have relevant production experience, it will be fine. As for research and development, it will definitely be led by me and my comrades from Qinghua University. After all, this die forging press is not starting from scratch. What we have to do is mainly to conquer the last few key technologies. Problems and further optimization of the overall design, the rest is engineering. ”
But Huai Guomo's expression did not become relaxed:
"Xiao Chang, don't be too optimistic. Since 1993, due to changes in the market competition mechanism, Jiang Zhong has been losing money year after year. Now, the factory's situation is quite serious. You may want to ask the weapons industry for the specific situation. , but last year alone, they lost nearly 20 million yuan, 20 million yuan..."
ifier
Hearing this situation, Chang Haonan also scratched his head.
The number 20 million is actually not too much to say it is too much.
Especially for him who comes from the aviation industry.
After all, for the Ring Project mentioned just now, the advance payment for the first aircraft alone is US$350 million. If Factory 112 builds a J-8C fighter jet, even the allocation price will be close to this amount.
But for a second-tier enterprise, this number is really quite a lot.
After all, according to what Lu Yuying said before, 10 research institutes and manufacturing plants, including the 611 Research Institute and the 132 Factory, have raised a total of more than 40 million yuan in funding for the development of the J-7F model.
Jiang Zhong lost half of his money in one year, which is really not a good sign.
In addition, as a large enterprise that has experienced prosperous times, this kind of loss is not more important in terms of money.
It means that there are problems within the factory.
Heavy-duty die forging press, a powerful and important tool of the country, must not make any mistakes during the production and subsequent manufacturing process.
So it's definitely not just a matter of just finding a factory of sufficient scale and throwing it over.
The most direct way to prevent China's overall planning department for machinery manufacturing from being dismantled is to prove that "machinery manufacturing is a sunset industry" is a false proposition.
Although there are some external factors for the abolition of the Ministry of Machinery Industry and the Ministry of Metallurgical Industry, if the industrial manufacturing industry can achieve trillions of revenue every year as it was more than 20 years later, this idea will not exist at all.
However, this hole is really too big, and even if Chang Haonan was wrong, it would be impossible to fill it in a short time.
You must know that before he was reborn, in the first quarter of 1996, all state-owned industrial enterprises were in a state of net losses after their profits and losses were offset.
Just improving the efficiency of a few factories and enterprises cannot reverse this trend.
So he could only settle for the next best thing and prove that "high-end machinery manufacturing is not a sunset industry." Considering the limited time, this heavy-duty die forging press is basically the only turnaround point.
After thinking for a moment, Chang Haonan spoke again:
“Director Huai, I think I need to know more about Jiang Zhong's current situation in more detail.”
"That's easy to say. I'll ask the Ordnance Industry Corporation to submit a report as soon as possible. It shouldn't take a few days."
This kind of request was nothing to Huai Guomo, so he agreed immediately.
But Chang Haonan shook his head:
“No, although I can grasp some basic information about Jiang Zhong by reading the report, it is still not intuitive enough.”
“I was wondering if I could go to Jiangcheng in person to see the specific conditions inside the factory.”
No investigation, no right to speak.
This is a famous statement made by a great man.
The most direct way to investigate is to see it with your own eyes.
In fact, considering Jiang Zhong's current situation, Chang Haonan knew without asking that everyone from Jiangcheng City to Hubei Province, to the Ordnance Corporation and even the Commission of Science, Technology and Industry for National Defense had definitely been there to see it.
But the goals of the leadership of these departments are too big, and every move is under the spotlight. I am afraid that as soon as the schedule is arranged, the factory will know in advance.
In addition, people with scientific research or administrative backgrounds often lack the concept of industrial production, and the other party is well prepared, so it is even more difficult for them to understand the real situation.
So after much deliberation, Chang Haonan himself was the most suitable candidate.
Facing this request, Huai Guomo hesitated.
It's not that he was afraid that Chang Haonan would see something.
Mainly worried that he is too young and inexperienced.
Huai Guomo himself has a technical background and understands the difference between a laboratory and a factory very well.
Although Chang Haonan has spent a long time on the front line of production and scientific research in various factories, the aviation industry system is his hometown after all. He can have some relationship with Du Yishan in most of the management positions, and he also has a very strong military background. , the situation is relatively simple.
Although Jiang Zhong was included under the Ordnance Industry Corporation, it was still in a transitional stage. The overall operation was still relatively independent, closer to the traditional appearance of an ordinary local state-owned enterprise.
Now we are facing the impact of large-scale enterprise restructuring and layoffs. People's mentality has changed and the situation is quite complex.
Let alone a young man in his 20s with a technical background, even some veterans who have worked their way up from the grassroots level are relatively numb when facing this kind of situation.
Prior to this, leaders at all levels have visited Jiangtong for inspection or on-site work no less than 30 times, but they still have not been able to fundamentally solve the problem.
Furthermore, being fooled is a trivial matter, but being tricked is a big trouble.
At present, within the Commission of Science, Technology and Industry for National Defense, Chang Haonan has been designated as one of the most critical personnel for the development of national defense technology, and there is absolutely no room for mistakes.
“About this, I need to report to Director Ding before I can make a decision.”
(End of this chapter)
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|