Chapter 495: One day, with a knife in hand, I will kill all the dogs in the world!
Even though the online paper submission function in this era is very anti-human, and the school's Internet speed is very poor, after a lot of trouble, Chang Haonan still submitted the paper before the end of the day.
After finishing this series of things, Chang Haonan turned off the computer, tidied up his desk briefly, picked up his coat from the hanger next to him, and called to Xu Yang, who was also about to leave:
“Shall we go out to have a meal together tonight?”
For players in the latter position, positions other than first-level work and communication are equally meaningless.
The core idea and most of the content of this article was completed by Chang Haonan, so there is obviously no reason to be the co-first author.
Therefore, she simply handed over the second work to another member of the project team quite generously, and she just put her name at the end.
But in terms of workload, she did contribute a lot.
So Chang Haonan planned to treat the other party to a meal as a courtesy.
If nothing else, the work of polishing the paper alone would be worth at least several thousand yuan after more than ten years.
And it's impossible to hire someone of this level to do it for you.
Xu Yang turned around, thought for a moment and tilted his head slightly:
"That's fine, but... I want to try Lao Mo, how about it?"
The so-called "Lao Mo" is the first premium Russian-style Western restaurant open to the public in Beijing.
In the hearts of many older generation Beijing residents, he has a special status.
Of course, the price is also quite exaggerated.
However, as the general manager of a second-tier state-owned enterprise, Chang Haonan no longer cares about the price. He nodded while putting on his coat:
"Of course, it's just a little far away. I'll ask Zhu Yadan to pick us up."
After speaking, he picked up the phone receiver next to him and dialed Zhu Yadan.
“I thought you would prefer somewhere more trendy like Maxim's.”
“French food? I've eaten it many times with my tutor when I was studying abroad. It's nothing new...”
Chang Haonan locked the office door and went downstairs with Xu Yang side by side.
In the next few days, Chang Haonan's paper submission caused quite a stir.
Eight time zones away, Cranfield University, UK.
Professor Roger Elinor has just returned to the office from a morning meeting, made himself a cup of espresso, and is ready to start a new day of work.
After turning on the computer, he opened his school email as usual, ready to see if there was anything he needed to reply to.
At the top of the list are usually a few personal statements.
Cranfield University is not well-known outside the industry, and you will hardly see this name on any university ranking list -
Since it does not recruit undergraduate students, it does not meet the "shortlist" requirements for most ranking lists.
But this does not mean that Cranfield University is not good.
On the contrary, in terms of strength alone, its engineering school and business school are among the best.
Especially in the aviation major, the level of integration of theory and practice is extremely high.
Professor Elinor is a master in the field of aerodynamic structure design and performance analysis.
He has participated in almost all key aerospace development projects of Rolls-Royce.
Countless students apply to study with him every year.
It's a pity that he has already selected the postgraduate quota for next year, and there will be no other opportunities.
Eleanor rarely wastes time replying to these emails that are destined to be meaningless, but just puts them into the recycle bin.
Next, there are a few boring work emails whose contents can be guessed just by looking at the titles, and a review invitation from the editorial team of ComputerMethodinAppliedMachnicsandEngineering magazine.
He subconsciously prepared to forward the email to several of his doctoral students.
But when the mouse pointer moved to the forward button, a keyword in the email title suddenly caught Elinor's attention.
“intergridboundarydefinitionmethod…”
How to define grid boundaries, which is exactly what he is studying recently.
As a senior consultant of Rolls-Royce, Elinor naturally participated in the research and development of the EJ200 turbofan engine planned to be equipped with the EF2000 fighter jet.
To be precise, he participated in the work of wiping the **** of the EJ200 engine.
When initially designing this model, confident British engineers continued the design of the RB199 engine in order to reduce weight to the maximum extent, without setting variable camber guide vanes at the low-pressure compressor inlet.
It should be said that with the experience of the previous RB199, Rolls-Royce engineers are already familiar with this. The excellent low-pressure compressor design replaces the role of the guide vanes in suppressing surge and reduces the weight to a considerable extent.
However, designers in the early years ignored a problem.
Comparing to the RB199 installed on a fighter bomber/interceptor aircraft, the EJ200 is installed on several levels of higher maneuverability. Therefore, during flight, especially supersonic flight, the engine itself needs to withstand huge overload.
In addition to the rectification function of the inlet guide vane, its fixed leading edge can also be used as a load-bearing member to form a three-point support together with the two support points at the front and rear of the compressor rotor.
The EJ200, which has eliminated this support point, is at risk of wear and tear on the low-pressure compressor rotor and the casing when flying under heavy overload...
This problem has been going on for a long time, so much so that the first two prototypes of the EF2000 fighter jet could only be equipped with old RB199 engines for test flights.
As a last resort, Professor Elinor, who was unwilling to participate in such a multinational cooperation project, was invited to handle the funeral affairs. The rotation of the compressor blades is a typical complex unsteady flow problem.
In the past, few people have conducted research on low-pressure compressors from the structural and deformation dimensions.
After all, engines without leading edge support are generally high-bypass ratio turbofans, which are mainly installed on passenger aircraft. It is impossible to perform crazy +9g maneuvers, so the overload capacity requirements of the engine are far less stringent than those of the EJ200.
At the beginning, Professor Elinor tried to proceed step by step, using the traditional finite volume method based on dynamic grids for structural calculations.
Then he discovered that the grid generation step alone would take about 8-9 months.
Every improvement plan needs to be done again.
This efficiency is obviously unsatisfactory.
So, almost from the beginning, he realized that he had to build the wheel from scratch.
But even for him, how could such a thing be possible?
Therefore, when he saw an article studying the same content as himself, he was naturally very excited.
Although this article has just been submitted, CMAME is, after all, the top journal in the field of computational structural mechanics.
The articles that dare to be submitted here have passed the initial review by the editor and are almost impossible to be complete academic waste.
Elinor made up his mind that as long as this article could give him even a little inspiration, he would give a "directly published" conclusion.
After a long wait of seconds and years, the complete document content was finally presented to him.
“The grid nodes in the overlapping grid that participate in flow field calculation are called active nodes, the grid nodes that do not participate in flow field calculation are called inactive nodes, and the grid nodes that are responsible for information transfer between grids are called inter-grid interpolation boundaries. point…"
“Using the combined parameter s of object surface distance and grid scale as the criterion parameter for classification…”
“Unstructured overlapping grid?”
Eleanor quickly found the point of the entire article.
“When the object moves or deforms, the non-structural mesh can make corresponding deformation adjustments according to certain model rules according to changes in the object boundary...”
With his pupils trembling, he read this paragraph over and over again several times, and finally determined that it was what he understood.
“Isn't this specifically designed to solve my problem?”
Elinor told herself again and again not to be too happy.
Because he is afraid that this will be an empty joy, which will lead to sorrow.
But the hand holding the mouse trembled slightly, which still revealed his inner uneasiness.
Eleanor would force himself to read almost every paragraph of text at least twice to avoid missing any key points or making mistakes in understanding.
However, the further back he looked, the faster he browsed.
The author's ideas are extremely smooth, and the theoretical derivation and numerical calculations are all done in one go. There is almost no part that requires him to ponder over and over again.
You know, this is a new concept that he has never been exposed to before.
To be able to write to this level, you must have extremely high academic skills.
It is not my skill to write an article that is complicated and difficult to understand, but it is really awesome to make it understandable to people who read it for the first time.
“Host unit search…”
“Hybrid unstructured mesh overlapping…”
“Unstructured overlapping grid interpolation method…”
Eleanor became more and more excited as he watched, and had long forgotten about "don't open the champagne too early".
He is even sure that according to the author's thinking, what follows this part should be the unsteady N-S equation solving algorithm based on dynamic unstructured overlapping grids.
As long as you have read this part, at Elinor's level, it will not be difficult to transform theory into practice and apply similar technologies to your own projects.
However.
When he turned to the next page of the document, the content that appeared turned out to be...
ˆConclusion…
This article is over...
Eleanor was immediately stunned.
His mood was like reading a novel and had just reached the climax.
As a result, the chapter is broken!
At this moment, he even had the urge to take a knife and cut the author along the network cable.
After a while, the professor slapped his hand heavily on the keyboard.
"Snapped-"
“fxxk—Why is it gone here?”
It's ten thousand days a day, please give me a monthly ticket! !
(End of this chapter)
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|