Chapter 112 Our own standards!
Yan Zhongcheng's report quickly attracted the attention of the Commission of Science, Technology and Industry for National Defense.
That evening, General Ding Gaoheng, director of the Science and Technology Commission, convened experts in the aviation field in Beijing and held a small but high-level internal symposium.
Of course, among the invitees were Du Yishan and Liu Zhenxiang who were flying on Beijing Airlines.
As academicians, the two of them were naturally provided with special cars, but Liu Zhenxiang's organizational relationship was still with Institute 624, so he had to squeeze into the back seat of the same car as Du Yishan.
“You are quite well prepared.”
Du Yishan glanced at Liu Zhenxiang, who was carrying a bulging briefcase.
The latter put the bag casually between the two of them and said with a smile:
“Your precious student, there is quite a stir this time. The people from Fucheng called me last night and told me that they were preparing to apply for a standard review, but I didn't expect that it would directly alert the Science and Technology Commission.”
“Hehe, this brat caused such a big thing, but everyone knew about it before me. In the end, it was me, the mentor, who was kept in the dark.”
Du Yishan had a cold face, but the joy in his tone could not be hidden at all.
Like a child who just got a new toy. Although he talks about it, he still can't help but take it out and wave it in front of his friends.
And he also deliberately pretended to be casual.
There is no doubt that Liu Zhenxiang is the friend who was dazzled:
“Okay, okay, I know you have a great student. Once the matters over at Institute 624 are settled, I will also transfer the organizational relationship back to Jinghang as a professor…”
“Actually, when Chang Haonan officially studies for a Ph.D. next year, you can also be his associate tutor.” Du Yishan looked sly.
“Go, go, go, is that the same thing...”
Liu Zhenxiang suddenly regretted that he had just rejected the proposal from the Science and Technology Commission to send a car to pick him up, and chose to ride in the same car with him.
But then again, since Chang Haonan has also shown extraordinary abilities in the field of aviation power, it seems that it is not impossible to put a name on it?
Associate tutors are of course nameless and unpleasant to hear, but if you can be a joint training tutor...
That can be considered at least half a student.
Looking at the street scene speeding past outside the window, Liu Zhenxiang couldn't help but start thinking about this possibility.
The seminar was held in an inconspicuous conference room of the Committee of Science and Industry.
The number of participants was not large, and they were only seated in two rows.
There was only a bottle of water in front of everyone, and there were no meeting documents.
It was not until about ten minutes after the scheduled start time of the meeting that two staff members finally walked in in a hurry and handed a black briefcase to Ding Gaoheng, who was sitting at the head of the conference table.
“Comrades, we only received the report at noon, so today's symposium is indeed held in a hurry.”
Ding Gaoheng said as he took out two documents from his briefcase and handed them to the first person on his left and right hands respectively:
"These two copies were just brought over from Fucheng by the confidential personnel, "Guidelines for Evaluating the Inlet Total Pressure Distortion of Aviation Turbojet and Turbofan Engines." Since I was in a hurry and did not have time to print more copies, I would like to trouble you to circulate them to all the experts. , Comrade Liu Zhenxiang will also brief us on the relevant situation."
Given the current status of everyone in the conference room, they rarely encounter things that need to be circulated, but it also illustrates the importance of this matter from the side.
“Total pressure distortion evaluation…”
“I remember it was GJB/Z64-94?”
“Yes, but that standard really has no operational value…”
“…” When they heard Ding Gaoheng name the two documents, a group of experts below also began to discuss in whispers.
Since it was a short-notice meeting, most people only knew that they were coming to attend a symposium related to the aviation industry, but they did not know what the specific content was.
About twenty minutes later, the file was finally transferred to the end.
The conference room became quiet.
Like Yan Zhongcheng before, although there is not enough time for everyone to read the contents, for these industry insiders, they can roughly judge the value of this thing with just two glances.
“Ahem…”
Liu Zhenxiang coughed twice:
“This guide was compiled by the 606 Institute during the high-altitude bench test of the improved turbojet 14 engine, and they are now conducting the intake distortion test according to the steps.”
“We know that the year before last, we issued our own national standards based on the introduction of American standards, but in terms of specific engineering applications, the 1994 standards still have some shortcomings.”
“For example, we don't know what impact different forms of distortion spoilers can have on compressor stability, how much steady-state and dynamic distortion intensity the same distortion spoiler can produce, and whether the integration time scale affects the stability margin. influential…"
“This guide issued by the 603 Institute based on the turbojet 14 engine testing experience addresses the issues of ambiguity in the 1994 standard and incompatibility with my country's aviation industry system at both the operational and theoretical levels. Supplement and correction.”
Hearing this, even Ding Gaoheng, who was sitting in the first place, showed a helpless smile.
The formulation of national military standards requires approval from the Commission of Science, Technology and Industry for National Defense.
In the early 1990s, faced with an almost blank standard system in China, the biggest problem faced by the Science and Technology Committee was not even that it didn't know how to establish standards, but that it simply didn't know what standards needed to be established.
So the principle at that time was to ignore the specific content first, rely on borrowingism to occupy the pit, and establish a standard system.
To make an analogy, it is probably like building a library from scratch. Because I have no experience, I have to follow the example of other libraries and first determine the book classification method and required books. As for the specific books, I can slowly fill in them later.
In this case, Liu Zhenxiang's comment that GJB/Z64-94 “still has some shortcomings” really saved the Committee of Science and Industry enough face.
After all, it is actually a shell, equivalent to a fake book placed on the bookshelf to occupy a place...
"I think this guideline is already very operational. You can consider sending an expert team to the 624 Institute to confirm the ground test results of the turbojet 14, and rely on the content of the guideline and existing engineering experience to evaluate the GJB/Z64- The operation and evaluation specifications in 94 are modified to better conduct distortion experimental evaluation technology research.”
This kind of internal small-scale symposium was relatively casual in nature, and Liu Zhenxiang's status in the field of aviation power was very transcendent, so he did not make any meanderings, but directly expressed his attitude after the introduction.
“I think the person who wrote this guide did not want to revise the old standards.”
As soon as Liu Zhenxiang finished speaking, another expert sitting at the end of the conference table expressed a different opinion.
He flicked the document in his hand:
“Because I am the last one here, I have some advantages and can see more time than all the comrades.”
"The 1994 standard was formulated based on the ARP and AIR series of general specifications. It has a strong British and American style in the evaluation method. For example, it uses a distortion network to simulate a typical distortion flow field and studies the impact of distortion on stability by describing the maximum instantaneous distortion. The influence of compressor surge or stall is established and the maximum dynamic distortion is established.”
“On the one hand, this method is very costly and cumbersome. On the other hand, it does not fit well with my country's existing aero-engine design system.”
"But the guide we just looked at has a completely different idea. It uses the turbulence degree in the engine inlet comprehensive distortion index to evaluate pressure distortion. The test method also uses the plug-in board that Academician Liu once proposed in 1986. Simulation method, but the plate shape should be optimized and discussed.”
"More importantly, in the last part of this guide, it also mentions the comprehensive aerodynamic stability assessment method in the engineering design stage. I took a brief look at it and it is definitely something that can be written by someone with experience in engine design. It is a guide. Very strong."
“So this is by no means a tinkering with the 1994 standard. We should treat it as a brand new standard that belongs to China!”
(End of this chapter)
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|