Super Craftsman Chapter 498

Chapter 498 - Geneva Car Show (1)

When the measured metal basket was brought out for everyone to see at close range, a few experienced academicians and Elder Liu were basically able to see it with just a glance.

This workpiece was directly processed and did not go through any polishing process. However, the surface roughness that could be distinguished with the naked eye had already reached a level between dark and bright luster. Compared to the highest mirror level, it was only three to four levels lower.

The mirror level means that the surface roughness can reach 0.006 micron, while the dark gloss is 0.1 micron and the light gloss is 0.05 micron.

In other words, the surface roughness that was directly processed had not been polished. Even the second-grade dark luster surface had reached the level of 0.1 micron. Some areas were even higher, perhaps reaching the level of 0.05 micron. In any case, even with the worst calculation, it should have a machining accuracy of about 0.1 micron.

"Even the worst is 0.1 μm?" Hearing about the processing precision deduced by a few Fellow Professors and Elder Liu, the leaders of letter-producing department finally understood why the few Fellow Professors looked like they were having hot tears in their eyes.

"From today onwards, we will no longer be on CNC machine tools with our necks stuck in Europe, America and Japan." Tears of laughter flowed down one of the leaders' eyes, but he did not feel like anyone else was laughing at him.

"He used to work for the Ministry of Foreign Trade and Economic Cooperation, and those guys used the Wassenaar Accord a lot during the negotiations." Beside, the leader who was deeply moved and was crying explained.

"Thank you! Professor Wang! "Thank you!" The crying leader walked to the front of Professor Wang and shook his hands a few times. Then he switched to second brother, to Elder Liu, and to Guo Tai Lai. It was obvious that he was truly happy, truly happy.

This scene was faithfully recorded by the cameras of the Central TV cameramen.

That night, "News Simulcast" had just finished broadcasting the news of a few Big Leadership s, and it was about to be the news of the successful development of this extremely high precision five-axis NC Machining Center of China's independent intellectual property right. The video of the processing of the metal basketball frame and the basketball net was intercepted to a certain extent. The final video was fixed on the letter-producing department Leader laughing heartily while his face was covered in tears. Even the voice of the female broadcaster reporting the news could clearly hear the excitement in her voice.

"How is this possible?" The news broadcast had not finished yet, but the moment it was broadcasted, it was sent to a certain person in Japan. The person who was currently resting could not be bothered to eat, and he threw down his utensils before heading to the study room.

The reaction from Europe was equally intense. Although it was just past noon, the CEO of a few large CNC machine tool factory s had already contacted each other nervously, and started to discuss on countermeasures.

Some in the United States were roused directly out of bed to discuss the sudden situation.

The second day, just as Professor Wang went to work, he received applications from many of his peers from several countries for an academic exchange. Of course, the important thing was that they all wanted to come to the to see that brand-new, ultrhigh precision Five Axis NC Machining Center with their own eyes. With regards to the applications for the academic exchanges, Professor Wang quickly agreed to all of them. This was a great opportunity for Waterwood University to appear internationally once again.

The country had never intended to hide this from the beginning. The reason why it was broadcast on News Simulcast was, on one hand, to boost the confidence of the citizens, and on the other hand, to let these European and American people know that you can no longer seal us on this.

This kind of thing had happened more than once. If China didn't have it, it could only be bought at a very high price. If one had the money, they couldn't even buy it. As long as China came out, the price would drop drastically and the blockade would be broken. When China was able to produce it, the price would immediately become a white dish.

Before this, Europe and America had already unsealed one micrometer four-axis numerical control system, but the five-axis processing center was still locked down, not letting go even if it were a machine tool of greater precision. But this situation, from last night onwards, we will never return. We already have our own independent intellectual property, the ultrhigh precision Five Axis NC Machining Center, and they will no longer be able to stop our neck.

Allowing these academic exchanges, allowing them to see for themselves that the country already had a physical object, rather than bragging, would allow them to fully recognize the truth and make the right choice in their subsequent decisions. In any case, he was only looking at the assembled processing center and was unable to see the exact core of the technique, so he casually looked around.

However, these things had nothing to do with Guo Tailai anymore. On that island, Guo Tailai actually made three parts of each island. He installed a system himself, and let the other senior assembling pliers train with the rest.

As Guo said, the state should upgrade the entire industrial system, not finish all the work by himself. Even if Guo Tailai was covered in iron, he wouldn't be able to hit a few nails. He still needed a large number of highly skilled industrial workers to be able to produce a mass production. It could be said that the problem of whether or not there were any problems had been solved, and now it was time to solve the problem of mass production.

Guo Tailai could make extremely precise parts, and similarly, the first processing center that he assembled could also make slightly lower precision parts. It was enough for him to continue making the required parts. The problem now was not manufacturing spare parts, but assembling.

Many high precision machine tools could not achieve true precision, because every component was accurate, but the assembler was so poor that it was unbearable. Unfortunately, there was no machine to replace the manual part of the work.

Old General Liu was the field instructor for the following assembling work. A group of senior assembling pliers that were drawn from a few units in letter-producing department would practice assembling the second, third, or even more five-axis processing center s here.

The island's high-precision processing plant has also become popular. In this regard, Guo Tai Lai helped Zhao Xiangbei obtain a very good condition, and in the future, the super high precision numerical control machine tool would probably only be able to have a close relationship with the South Group.

Guo Tai Lai had two invitation letters in his hands. One was from the technology company and the other was sent directly to the car factory. One was sent from Pagni, the other from Mazda. The two invitations were about the same thing, inviting Guo Tailai to this year's Geneva car show.

For some reason, the change from March in history to April in history might be related to the change in history by Guo Tailai. The two car factory s both invited Guo to attend the new car release ceremony, but Paganee was the one who released the wind seed Zonda and Mazda was the one who released the final version of the RX7.

With a Schengen visa, what are we waiting for? Guo Tailai immediately decided to go!

Chapter end