Guo Tailai didn't take the small incident to heart. On the other hand, after he went out to relax, he was even more energetic when he came back to work.
It would also consume a lot of energy to process, but it was much less than stimulating the growth of cells. At most, it would consume 10 times more energy than normal, which didn't affect Guo Tailai much.
The car parts had been completed, and only the carbon fiber s' materials were left. He had no choice but to wait for the carbon fiber s to arrive.On Long Fei's side, the adjustment of the engine had a new result. The maximum power had already reached 430 horsepower, and was still being adjusted bit by bit.
In addition to debugging, it is more important to record the results of every change in the parameters of each point. On this point, Wan Ming contributed greatly as he created an access file database, where every small change was recorded. There was no other way. Without the raw data, he could only record a little of it himself. Later on, it would be valuable information and experience.
"Fatty, why didn't you adjust the power according to the limit?" Long Fei actually wanted to madly modify it a long time ago, but since he had to take care of the balance, he could only adjust it this carefully. This had always been a question in his heart. Guo Tai Lai was there, so he asked casually.
"The materials are very rare." Didn't Guo Tai Lai want to use violence to reform the magic? However, the cost of the wear-resistant and heat-resistant metal used to make the engine was too outrageous. It was not a business matter, so Guo Tailai couldn't get someone to compensate for it. He could only deal with it this way, "If you don't want to run the engine for a few days, you'll have to be so careful!"
A two-rotor, 1.3-volt engine once had a costly upgrade to 800 horsepower, but that was at the cost of drastically reducing the engine's life. The life of an engine that has been converted by violence will not exceed a month.
If it was a normal material, Guo Tailai might have played the same game, but he didn't want to waste his life playing with such expensive material. He wanted to improve his lifespan as much as possible, but this required more skill and more careful adjustment.
"How much is the material?" Long Fei didn't know what kind of material Guo Tailai used to build the engine, but he knew the properties of the engine and knew a lot of parameters."When I took it, it was over a ton." Guo Tailai didn't hide anything and directly told them the price. "It might be cheaper now, but you may not be able to buy it with money. "I was afraid that I wouldn't be able to buy more, so I decided to save a bit of time and play. Otherwise, we might as well change our game too."
Upon hearing that a ton of heat-resistant metal could actually cost over a million, even Long Fei who played with cars a lot was speechless. Previously, he would often overhaul some motorcycles, but that was only for a few tens of thousands yuan. How could he be like Fatty, with his engine being made up of millions of yuan? This was not even counting the carbon fiber s for the outer shell. If Fatty's handicraft fees were to be added in, then this car's price was simply sky-high.
Just as he was chatting with Long Fei and watched him adjust the engine meticulously, his phone suddenly rang. Guo Tailai quickly picked it up.
"Master?" To Guo Tailai's surprise, the person who called was Elder Liu. Since the last time Guo Tai made shoes, he usually came to visit Elder Liu for a while. Elder Liu never called him himself, so he didn't know what was going on this time.
"A one meter two by one two meters flat plate, how much can you achieve for flatness?" As soon as he got up, Elder Liu asked Guo Tailai a question about processing accuracy. "Can you do it if it's lower than 5 microns?"Although he didn't know what Elder Liu was trying to do, Guo Tailai answered honestly, "Absolute plane? "Even a little bit larger can be done. Hm, the accuracy can also be increased a bit."
"What about two meters by 1.5 meters?" Elder Liu seemed relieved to hear Guo Tailai's answer and asked again.
"Sure!" This time, Guo Tailai answered affirmatively without thinking.
After that, Guo Tai Lai couldn't hear anything anymore. It seemed Old Liu was holding the microphone to discuss with someone else, so Guo Tai Lai just waited quietly. After a while, Guo Tailai heard Elder Liu's voice again.
"What if it was bigger, three meters by three meters?" Elder Liu's voice sounded a little agitated. It was still a matter of processing accuracy."If you want to ensure that the stress is completely released, at a constant temperature and with enough support strength, that's fine." Guo Tailai knew what Elder Liu was excited about, so he replied calmly, "Do you want to get on a large scale ultrhigh precision grinder?" The flatness can be up to about 1 micron. "
"Alright, I understand." Guo Tai Lai heard Elder Liu's long breath and relaxed tone, "The department has some design breakthroughs, but the processing and assembly process can't guarantee the accuracy yet. "When you're ready, you can go back to the department."
"Alright!" Guo Tailai agreed without any hesitation.The absolute plane was mostly used for the sliding surface of the super precision machine, so the higher the accuracy, the better. At the beginning, 1.2 by 1.2 meters could be used in normal sized machine tools, but later, the word '3 meters by 3 meters' was exactly what Guo Tailai meant by 'a large area grinder'.
Elder Liu had always been the department's spare parts production and assembly director. Now, he had to call Guo Tailai and ask him, indicating that the accuracy of the grinding machine designed by the department definitely exceeded Elder Liu's control. This was a great thing!
As long as these newly designed machine tools come out, it means that the production capacity of the machine tools in our country will rise to a whole new level, so that the machine tools with higher precision can be produced by the mother machine. This also means that the domestic machine tool industry will be collectively upgraded.Guo Tailai, of course, raised his hands to support such a good thing. Guo Tailai, who had always been stingy with his words, would never even raise the price to help out. Guo Tailai was never vague on matters of right and wrong. From processing to assembling, Mr Guo is sure to help along the way.
Of course, the processing precision was still a bit conservative. When that time came, if they had to process in public, they could only use their hands to process to a accuracy of less than one micron. If they could do this in a closed mode, then they could directly use the highest precision.
Not long after he put down Elder Liu's phone, Guo Tailai received a call from Professor Wang. The Professor Wang thanked him, and previously, he had developed a five-axis processing system based on the stable chicken head principle that Guo Tai Lai discovered. The Operating System had almost finished preparing the system, and was in the midst of debugging and looking for a bug, but its mechanical accuracy could not match the accuracy of the Operating System, which was a bit lacking.
With Guo Tai Lai's confirmation, this set of designs on Professor Wang could truly be considered as sample testing, so Professor Wang immediately called Guo Tai Lai to express his thanks.
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|