"Me? "A boast?" Guo Tailai pointed at his nose and was shocked. It seemed like he had never played like this before. How did he end up with a boasting hat?
"Sorry, I didn't use the right words." The Technical managers sincerely apologized: "I just think that we should take things step by step. We should start from a young age, accumulate experience, and build on it step by step. In this way, even if he failed, it wouldn't be too big of a loss. "Don't take too big a step, or you'll miss the lead."
From a cautious point of view, Technical managers's words were not wrong. He was not a bad person either. He had been talking about technical problems before. He didn't have any other personal belongings, and he was not a selfish person. The only problem he had was his lack of confidence in Guo Tailai."I can do it." Guo Tailai expressed his confidence again. "Please trust me."
"Too risky." Even though he had the support of almost everyone in the academy, Technical managers still shook his head. "Once we fail, the losses we would suffer would not be small. It's still better to take things step by step."
"Excuse me." Guo Tailai felt that he could still fight for it and asked, "If I really fail, it would only be me working hours and a large area of cast iron plate. I didn't even ask for a salary, how much of a loss would it be?"
This was a project for the national school. After it was completed, it would cause the entire domestic numerical control machine tool to soar. Guo Tailai was holding up his hands and feet in support of this project. On this matter, whenever Professor Wang mentioned it, Guo Tai Lai would not even ask about the salary. This could be considered a huge loss, but Guo would never admit it.
The Technical managers frowned deeply upon hearing Guo Tai's words, and looked towards the leader of the Professor Wang and seminal system with a hint of doubt. Where did he find such a rash person? If he didn't want the salary, would he not suffer any losses?
"I'm sorry, but I don't know if you really understand the production process of the Absolute Plane." Seeing that no one spoke, Technical managers finally said with a frown: "Firstly, the processing of an absolute plane is not one at a time, but three at a time. So, if you fail, the first thing you do is you lose three tablets, not one. "In order to create an absolute flat area, a seasoned old master would use a spatula to flatten the roughened surface while at the same time digging out a piece of the control plane. To coat the control plane with color and to slide the processing plane on the control plane, the parts stained on the processing plane and the parts lost on the control plane are the parts raised on the two planes respectively. Flatten the raised portion and continue to slide. This process is repeated until the color of the two planes is exactly the same.
However, this is not an absolute plane yet. To prevent the two planes from forming the same curvature, we need another reference plane. Usually, when processing an absolute plane, you have to process three planes at the same time. Only when any two of the three planes are consistent can an absolute plane be considered to have been created.
This was exactly what the Technical managers was saying. Three planes at a time, and if it's bad, it's not just one, but three.
"In addition, for roughing small areas, although we don't have that size of a grinder, we don't have a huge investment when it comes to modifying it." Technical managers said confidently, "But if it was a large area grinder, then there would be a lot of changes. Even though it is only a rough grinder, there is a huge qualitative change in the area of the grinder. Not to mention investing, it will take a very long time. "
"Also, the bigger the area and the heavier the plate, the bigger the deformation." Technical managers thought for a while and said sincerely, "In order to grind both sides together, you definitely have to raise them multiple times, which inevitably brings about a decrease in accuracy. Unless a large double flat grinding machine is specially developed for this purpose, this will involve a large amount of money and time investment. ""Xiao Guo, I am not targeting you." Technical managers indeed did not think of anything else, but from the perspective of actual practice, he said, "But to start with the large board of three meters by three meters, the risk is too great. It's better to start from a young age, one step at a time! "
From the perspective of normal processing, Technical managers's words were very reasonable. And it was also consistent with the progressive development of thinking. Experience was all built up from repeated successes and failures, and it had to be built up from a possible process. If he just released a rocket, he would not gain any experience. Other than teaching them a lesson, there was nothing else he could do.But from Guo Tailai's perspective, what he was worried about would not happen at all! Guo Tai Lai definitely won't use three planes to compare to make an absolute plane. His 360 degree 3D measurement accuracy can reach 5 nm, and his processing precision can reach 50 nm. It's even higher than the processing precision in the chip. As long as he used his vision to observe, he would be able to determine which was higher and which was lower, and the error wouldn't be more than 50 nm. It was basically impossible to fail, and even if he failed, it would only be the loss of a cast iron plate.
The problem was that Guo Tailai's processing skills could not be described! At the very least, he could not completely say it out loud. He could say that his processing accuracy was very high, could say that he was very unique, could say that his processing time was short and his speed was fast, but regarding the nanobot, he would not say a single word.
This became a contradiction. Technical managers did not dare to fully trust Guo Tai Lai's skill, as he was afraid of delaying the project and causing losses. On the other side, Guo Tai Lai was also unable to prove his skill, so the two sides were at odds.
"How about this, I just want two cast iron plates with good stresses." Guo Tailai had no way to convince the Technical managers, so he could only think of a way to deal with the employees, "Give me a week, I will make two pieces for you to measure. In the meantime, we can continue to do what we need to do without delay. How about it? "The people from top to bottom of the school must have supported Guo Tai. Now, the Technical managers in the ministries were a bit more cautious. It couldn't be said that he was doing something wrong. There was a reason for him to consider it that way. Guo Tai Lai's words, could already be considered as giving face, the Professor Wang and department heads immediately supported him.
Relatively speaking, this was something that could barely be accepted. Without delaying the preparation, at most, it would only be two metal plates and a week's time, and the time could be counted as well. Technical managers considered for a while, then finally nodded.
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|