The first thing Guo Tai Lai did when he arrived at the Mercedes-Benz headquarters was to see the dust-free workshop, which had some machinery but most of them were handmade tools.
Because of Guo Tai Lai's special request, this Workroom was not as open as last time, and there was no way outside to see what was happening inside. He was not inside the Workroom, and there was no way to see how Guo Tai Lai worked.Guo Tai Lai carefully examined the tools. All the tools, here are two sets, one set for use, one set for backup. He examined both sets and even tested them on a prepared titanium embryo. This piece of work was purely for Guo Tai to try his hand at. It was not an official work piece.
All the tools were very exquisite, even if it was for Guo Tai Lai to use by hand, they were all polished and looked like they were mass-produced, but each set was not worse than the one used by Old Liu's studio. Just in terms of materials alone, he was on a level higher than them. It had to be said that in the field of basic materials, there was still a gap between the domestic and foreign countries. This was a fact.
While Guo Tai Lai was inspecting the tools, Huang Weiguo and the other two were checking the Workroom. Their mission was to ensure that there were no cameras in the Workroom and no one could see how the Director Guo was doing.Huang Weiguo and the other two were very serious about this. They knew what Guo Tai Lai meant to the people in the country, although the country did not restrict Guo Tai from leaving the country, but since they were protecting Guo Tai, then they could not let Guo Tai Lai's exclusive skills be stolen. Guo Tai Lai might have some skills that no one else could learn, but he was prepared for it!
The three of them had also inspected it very carefully. Liu Zhizhuan even took out an electronic instrument to examine it. This was an anti-eavesdropping detection tool used by the special forces. After careful examination, the three of them confirmed that there were no hidden cameras or eavesdropping tools in the Workroom.
Next, Guo Tailai's mission was to go back to his hotel room to rest after a big meal and to reverse the time difference as soon as possible. The titanium alloy engine was a delicate item. Only after resting would it have sufficient spirit and energy to work.
Every workpiece that Guo Tailai had finished, had to be measured here. After all the workpieces were finished, he would bring a few of them to the industrial laboratory to use the laser interferometer to measure.
A day after Guo Tai arrived, their Technical Director also arrived at the headquarters of the Mercedes-Benz Corporation. In fact, the two companies were waiting anxiously. Everything was ready before, but China was celebrating the Spring Festival. They had been waiting for a month and finally Guo Tai came to work.When the Technical Director arrived, Guo Tai Lai was carefully looking at the blueprints, his mind was frantically constructing the three-dimensional structure of the engine. While doing the construction, Guo Tailai calculated. After the construction was completed, Guo Tailai even suggested a few areas that could be improved on.
These are mainly on the thickness of the workpiece, the engine is made with all-titanium alloy, performance strength is good, in some cases, some dimensions can be appropriately reduced in order to reduce weight. Although the designer of the Mercedes-Benz had reduced its size, Guo had calculated that it could reduce its size, mainly because of its thickness, and its weight could be reduced further.Of course, Guo was only making suggestions, and Guo was not sure whether Mercedes-Benz and McLaren would agree. But Guo Tailai didn't expect that both sides would take this very seriously. They gathered the designer engineers to study and calculate overnight, and when Guo Tailai left in the morning, the Technical Director expressed to Guo Tailai with an extremely impressed tone that they could make it according to the size he suggested.
The dimensions suggested by Mr. Guo, calculated by a bunch of designers and engineers, could actually reach the current engine strength level. This number was too accurate. It was exactly five percent more than the maximum engine strength. Any more and it would be a waste. Any less would be unsafe and would be wonderful.
This made Technical Director admire him greatly. In order to test this number, they had calculated the number of people that would be sleeping, but there seemed to be only one person, Guo Tailai, that had seen the engine blueprints for the whole afternoon. The Mercedes-Benz side could swear that the design was just shown to Guo Tailai when the Technical Director arrived. Other than looking at the map, Guo Tailai could even give him such precise numbers. It was unbelievable.
There were two designs, one part titanium alloy and one all-titanium alloy. Guo Tailai had given out the numbers separately. This only meant that Guo Tailai was not only a master of finishing, but also an expert in the design of engines. The change in these numbers alone has boosted the confidence that Mercedes-Benz and McLaren have in Mr. Guo.All the workpieces had been prepared, and some of them had even been processed into coarse embryos. However, only cast iron and aluminum alloy, titanium alloy part can only wait for Guo Tai Lai personally.
Guo Tai Lai did not let down Mercedes-Benz and McLaren who were anxiously waiting. It only took him one morning to finish processing all the non-titanium alloy parts. Of course, it was after Huang Weiguo and the other two had checked again to see that Workroom was guarding the entrance of the Workroom. All the completed artifacts, the most proficient investigator for Mercedes-Benz, using their headquarters' most accurate measuring tool, the result was enough to make one go crazy.
They were in Germany, which was known as the strongest automated process Germany, and which used the highest precision fully automated NC Machining Center. The processing accuracy was not even comparable to the precision that was slowly polished by hand tools, how could they endure such kindness?
When Guo Tailei started to process the titanium alloy, which was only 50% slower than the aluminum alloy and cast iron, the vice president of Mercedes-Benz couldn't sit still anymore after hearing the news. The first thing Guo Tai Lai did when he came out of Workroom was that the Vice Chairman wanted to talk to him about further cooperation.
Titanium alloy was processed with high precision. If this method could be spread out on a large scale, then just based on this perovskite engine thing, how many times could a large number of cars sell?"Let's talk after I finish these two engines and test their performance, shall we?" Guo Tailai didn't refuse, but he still wanted to see the result. At least that way, both sides would have a basis of reference.
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|