Super Craftsman Chapter 179

Chapter 179 - Gifts to Dad (1)

"Xiao Fei!" How can you say that? " Wan Ming, who was listening at the side, instantly scolded.

Competing with Fatty in processing accuracy? What kind of joke was this? Wan Ming had seen that high precision gyro back in seminal system, and the top had already been marked as being handmade by the student of seminal system, Guo Tai Lai. There seemed to be no one in the country who could replicate it. The upper part was marked with the processing precision, if it was less than 0.5 micron, was that a joke? The highest precision imported in China is only 1 micron of machine tools, the difference who knows how much.

"Fatty, don't mind it!" After reprimanding Long Fei, Wan Ming turned around and apologized to Guo Tai Lai: "Xiao Fei is young, and have never seen a real expert before."

"It's nothing, it's nothing!" After experiencing the rocket engine incident, Guo Tailai didn't care much about such small matters. "We're not familiar with each other, it's good that we're familiar with each other. "Take down my cell phone number and call me when you're ready."

Wan Ming was in his third year of university last year, so he was in his fourth year, and was at most 21 years of age. That Long Fei was younger than Wan Ming, so why would Guo Tailai Lai care about such a little brat? There were too many people questioning Guo Tai's craftsmanship. Did Guo Tai Lai want to explain it to him one by one?

However, from the way Wan Ming had specially introduced him to Long Fei, he could tell that Long Fei was very powerful in terms of changing his car. One must know that Wan Ming's family produced motorbikes, if he could accept this, it must be an expert in this area.

He did not introduce the hot chick that Wan Ming was carrying on his motorcycle, nor did he have the need to get to know Guo Tai Lai.

This time Wan Ming was very happy, he took Guo Tai Lai's phone number, and happily said that he would go and prepare. He was fully aware of Guo Tai Lai's capabilities. With Long Fei's help, he could definitely create a brand-new NR750.

It was also a pleasant surprise to be able to meet Wan Ming. This fellow looked like he was living a comfortable life. He was originally a fuerdai, playing with his favorite motorcycle and carrying a hot chick that liked him. He was simply a winner in life!

Guo Tai Lai was still worried about activating all the nanobot's functions, so he split up with Wan Ming and slowly walked home, eating and chatting as if nothing had happened. He waited until the evening when all of the functions were activated, but in the end, he could only let himself sleep and watch again the next morning.

Just as expected, Guo Tailai received a notification saying that all the nanobot had been activated. Not only that, even the dormant nanobot that were replicating in advance had started to take turns to end their dormant state.

When he was about to create the wrist watch, Guo Tai Lai remembered that he did not have any professional watch tools. It was impossible to assemble those delicate parts with one's fingers. Guo Tai Lai might even need to make a set of watch tools.

The tools would not need special steel, so Guo Tailai decided to go to the car factory to quietly make them. At the same time, it also prevented his mother from feeling idle and nagging every day.

In that clean Workroom, for the first time ever, Guo Tailai started to use the nanobot's body parts to make wrist watch. He started with the smallest gear, which would definitely not exceed 5 mm.

Guo Tai Lai controlled the nanobot to cut down a small piece of steel that was about 3 mm long. The cutting process was extremely easy. Other than being a bit slow and not as quick as Guo Tailai's hand sawing, the other operations were flawless. Even the cut surfaces were all mirror level, so there was no need to deal with them afterwards.

Guo calculated the processing speed of 5 mm thickness at 1 cm per 10 minutes according to the cutting speed. This processing speed could be said to be slow. If it was used on large parts, then Guo Tailai would probably die from exhaustion just from the time alone.

But on the extremely fine parts that were used to make wrist watch, this kind of processing had an incomparable effect. Guo Tai Lai could control nanobot to make any kind of surface. Not only was the cutting size extremely accurate, the surface treatment was done at the same time and all the parts and components could be finished at one go. The most terrifying thing was that they did not need any external tools, and nanobot themselves were the best tools.

A very fine 2 mm diameter gear could be completed in less than 10 minutes with Guo Tailai's help. The machining accuracy is directly 0.1 micron, the surface treatment is completed mirror, Ra value will never be greater than 0.005 micron.

For the time being, Guo Tailai was not familiar with this method of processing workpieces in his mind. For the time being, he could only control one processing surface, and only process one surface at a time. By the time Guo Tai became familiar with it and started to work on several surfaces at the same time, his speed would be even faster.

In Guo's excitement, one by one, watch parts were created. Of course, for the time being, it was only those parts that could be forged using fine steel. Some special wire systems and some special reeds need to be made of suitable high impact steel. I've already bought these little jades, so I should be able to get them today.

As Guo Tai Lai became more proficient, his processing speed became faster and faster. One centimeter had been shortened to only three minutes. It seemed that he got more familiar with what Guo Tailai was instructing him.

After making the fine steel parts, Guo Tai Lai started to make the tools to make the watches. From big to small, they were all made in brand-new ways. Finally, there was the bearing of the ruby, as well as cutting the diamond into the shape suitable for embedding it onto the wrist watch.

It took Guo Tai a whole day to finish his work. It was already dark by the time he came out in the morning. He was so engrossed in cooking that he actually forgot to eat lunch. When they returned home, Ding Yumei couldn't help but nag at them again while devouring the food.

The next day, Guo Tailai went straight to Zhongguancun Company, took a few pieces of reinforced crystal glass and ten reeds from Little Yu's side. He didn't care about the girls' request for him to carve a small clay figure, rushed to the garage and continued working.

The enhanced crystal glass was still polished using nanobot. Under Guo Tailai's control, it was possible to make a perfect watch mirror without any mistakes. The reed was also created according to the dream memories of the future, and Guo began to assemble.

The basic knowledge imparted by Elder Liu allowed Guo Tailai to master the skill very quickly. He assembled the components little by little using a digital assembling method that was many times more precise than that of the Switzerland's watchmaker.

After he closed the lid, Guo Tailai casually shook it a few times before the automatically strung mechanism of the wrist watch began to work. The second hand started to rotate accurately. Guo Tailai pulled out the knob, looked at her digital watch, and set the time to the correct time.

A square wrist watch, one of the later Cartier Tank Series. However, what was displayed on the surface of the watch was not Cartier, but a person's name — Taylor. G. One letter was not pretty, but it was still long and beautiful.

Taylor = Tai Lai, G = Guo, Taylor. G = Guo Tai Lai.

Chapter end