Super Craftsman Chapter 185

Chapter 185 - Scolding (1)

Lu Zhiming pointed to the direction of the toilet speechlessly, then walked into the Workroom to check out Guo Tai's finished product.

The middle-aged man shared the same thought as him; the two entered the Workroom one after the other, and were stunned at the same time. Guo Tailai said he was done. Where was the thing?

There was nothing on the Workroom's table, and there was nothing on the table beside it. It was clean and tidy up the floor, but it did not look like it was there either.

"It really is just deliberately mystifying!" The middle-aged man sneered: "Going to the toilet? Run away! "

Lu Zhiming's heart suddenly skipped a beat. He raised his hand and brought the thin copper rod that Guo Tai Lai gave him to the front of his face. At the end of the copper rod, there was indeed an exquisite gyroscope, but at the bottom of the gyroscope, there was still some metal that had not been broken off, and was connected to the copper rod. This clearly showed that this was made from materials taken from the copper rod, and not brought from the outside.

This Workroom only had a few tools, and no welding tools. Thus, this situation could only be the case.

The middle-aged man had just finished speaking, and hadn't even sneered at Zhao Xiangbei when he saw the gyroscope. The look of disdain on his face instantly disappeared, and an incredulous look appeared in his eyes.

"He … How did he do it? " The middle-aged man could not help but be shocked. To create such a small gyroscope, the master who had the best craftsmanship out of all the craftsmen would have to meticulously polish every part of the gyroscope.

However, the little fatty had obviously completed all of the spare parts at once. Furthermore, he had even assembled them together. Was he a monster? What was even more inconceivable was that he did not need to adjust the processing angle when processing? How was it possible for them to be connected to a copper rod?

The middle aged man only felt that time was inconceivable, but Lu Zhiming was proficient in it. He did not need to look to know that the processing accuracy of the gyroscope that Guo Tai had made was much higher than what the Old Masters made here. The surface roughness was directly at the mirror level and the assembly was extremely precise.

Lu Zhiming silently walked out, holding the thin copper rod, he walked to Zhao Xiangbei's side. He first let Zhao Xiangbei take a look, then turned towards the Old Masters s.

Needless to say, attaching the gyroscope's base to the thin copper rod was a stroke of divine will. Without even needing Guo Tailai to say anything, everyone knew that it was impossible for the gyroscope to be ordered from abroad and brought in. Selling the country to make enemies was simply a joke.

In terms of vision, those old masters were much stronger than those who were in charge of administration. With just a glance, the old masters sighed in their hearts.

Master level craftsmanship, they were convinced of their defeat. He had no choice but to accept it! For a single person, making a complete gyroscope in an hour, looking at the consumption of the materials for the thin copper rod, it was basically not a waste. In other words, the parts and components that were made by someone else had a 100% rate of quality.

At this moment, the several old masters suddenly felt very tired. Even after a lifetime of hard work, it was still no better than a young lad. It seemed like the new generation was really pushing forward the new generation. The unit had bought high precision numerical control, and had even recruited quite a few university students. These people were really old, it was time to be eliminated!

"That's not right!" The middle-aged man who was completely shocked in the Workroom suddenly rushed out, and shouted at the group: "Didn't you guys say he could become the smallest gyroscope? "Why is he doing the same size as us?"

The dispirited Old Masters was also stunned, and even Zhao Xiangbei was stunned. That's right, didn't Guo Tailai always have the ability to make gyroscope of the smallest size? Why didn't he do it? [Is it really impossible?]

"Brother Lu, turn the bronze stick over." Not far away, Guo Tai Lai who had already went to the toilet came out, while shaking his hands that had just finished washing up, he casually said to Lu Zhiming.

Without saying a word, Lu Zhiming flipped the other end of the rod up. This time, even Lu Zhiming, who knew that Guo Tai Lai was very powerful, was stunned.

This end of the rod was similar to the other end, also connected to the base of the gyroscope. However, the gyroscope that was connected to this end was not one, but ten. The arrangement of the three quarters was the smallest and most neat. Not only that, even the pointing of the top was the same after it was assembled. This was something that could be done by hand. How in the world did he do it?

When the few old masters saw this, their eyes immediately went wide, wishing that they could directly pounce and snatch it from Lu Zhiming's hands. How did this young man do it? How could he achieve such a small size with such high precision? This surface roughness, what would it take to polish it?

"Is this ground ground using the 'Liquid Grinding for Micro-Precision Parts to Remove Thorns' method mentioned in the latest issue of 'Mechanical Craftsman'?" One of the old masters raised his head and asked Guo Tailai, who was walking towards them.

"Huh?" Guo Tai Lai was startled by the question, he then looked at Zhao Xiangbei in confusion. Didn't they say that these Old Masters didn't like numerical control and didn't want to learn anything? Why are you paying attention to the latest technical journals?

Zhao Xiangbei was also confused, but he maintained his composure. Guo Tai Lai didn't understand, but he still turned around and smiled. "Old master, this is my exclusive method. No one else can do it, ordinary people don't have such stability."

It turned out to be a unique method, and it was even a basic stability skill. There was no other way. The old master sighed and did not ask any further.

The ten smallest gyroscope s finally forced the middle-aged man onto a dead end. Seeing the few old masters already shaking their heads and sighing, he looked at a few more management staff supporting him, but they were just scared out of their wits.

Would he admit defeat just like that? Retreat to the second string just like that? The middle-aged man clenched his teeth. No! With great difficulty, he managed to reach this position. After so many years of being a wife, Zhao Xiangbei and the others actually wanted to change the rules and give the young people a chance? How could this be allowed?

"You can't use what you look like. Are you kidding me?" The middle aged man's eyes were red as he stared at Zhao Xiangbei and questioned him.

"Fatty, take it out and examine it on the spot." Zhao Xiangbei directly said to Guo Tai Lai without even looking at the middle-aged man.

Guo Tai Lai walked forward and took the copper rod from Lu Zhiming's hands. He lightly touched the side of the big gyroscope and it fell into Lu Zhiming's open hands.

"Be careful, such a precise gyroscope!" The old master who had questioned him just now stopped him with a pained expression.

"Don't worry, old master, this one needs to work when it's being fired from a rocket launcher." He turned the other side of the pole, and with a flick of his finger, all ten gyroscope fell down, "This little vibration is not a problem."

Chapter end