Chapter 472 - The Flowing Wind Can't (1)
"This... "This …"In JOURNAL SCHEDULE TECHNOLOGY CO. LTD, a group of employees looked at the titanium alloy ball lampshade that Guo Tai Lai had made, all of them with faces full of shock.
The entire piece of titanium alloy, made as a whole, required a slight accuracy and was completely satisfied. Not only was he satisfied, he was also more than satisfied.
It was a spherical knitting lampshade. It looked almost identical to the promotional picture on the advertisement page. The only difference was that one material was made of wool, while the other was made of titanium alloy wire.
Another difference was that the light bulb entrance, the finished product Guo Tailai brought, did not have the opening. Instead, it was replaced by a titanium base, under which the technician's signature could still be seen.
This indicated that the woven globe shade was the piece of titanium alloy that he had taken away that day. The whole thing was fixed to the base and connected to the base.
There were few people who had never done mechanical design before. With a glance, one could tell that this was an entire process, and was definitely not welded up after completion. Especially those entangled areas, not only did they produce the effect of wrapping wool, but even more frightening was that they produced the effect of wrapping wool.On every piece of titanium alloy wire that was of the same thickness, there were fine and furry fibers that looked exactly like wool, but when everyone looked closely, they discovered that it wasn't wool at all, but extremely fine titanium alloy fibers.
Welding? None at all, all processed in one piece. Moreover, even if they were welded, how could they weld so many titanium alloy fibers that were many times thinner than human hair? Furthermore, how could they be so polished that not even the slightest trace of welding could be seen?
Just the knitting of the ball lampshade caused the technicians who knew the difficulty of manufacturing to be shaken to the point where they could not utter a single word. In fact, what was even more frightening was that they couldn't even utter a word of praise. They could not even imagine how this had been processed, nor what kind of machinery could produce such an extreme effect."Stop looking, it's handmade." Hearing this question, Guo Tailai answered with a smile, "I told you, we are just doing R & D designs so that you can squeeze out the best performance. This is a demonstration to let everyone know what I can do and also to give you a reference for your design."
When Guo Tailai spoke, the group listened obediently and nodded. It was completely different from the day before yesterday when they questioned him with unfriendly eyes, as if they saw their aunt's little friend in kindergarten.
This was what Guo Tailai wanted to achieve. Other than showing them his skills, he wanted to shock these people with good skills and temper. In the original unit, they were the kind of people who were not understood by others because they thought they were untalented, but in here, Guo Tailai gave them room to show off, but he also wanted them to know how strong he was before they would listen to his words.
"We will be in charge of research and development. When the time comes, we will mass produce it." Guo Tailai brought up the topic again, "But that's what you craftsmen should think about. When designing, first take out the ultimate technology, then let the craftsmanship balance the production and performance."A few of them were craftsmen, so they could only smile wryly when they heard this. In terms of techniques, who wouldn't want to try their best? Unfortunately, when they did process design, they could only do subtraction at times. The group of people looked at them with faces full of sympathy. Having a grandmaster of processing, then researching the technological process, it really wasn't a happy thing!
If it was said that everyone was extremely shocked to see the titanium alloy ball lampshade, then when they saw the two chips, everyone was completely speechless.
Of the two chips, one was packaged and the other was unpackaged. It was placed before the crowd, allowing them to watch on.
"This package can be inserted into the circuit board to be tested." Guo Tailai pointed to the one with the extra long pin and then pointed to the one that was still on the round chip. "You can check this with the microscope."
He carefully stripped off the imported chips from other countries and then used the electron microscope to trace the circuits. From the 1970s until now, there had been people who had done this in the country. Now, Guo Tailai saved them the trouble of taking the monocrystalline silicon chip and looking at it through the microscope.The pin was especially long, so he could insert it into the standard 8086 wiring slot. The size of the chip Guo Tailai made was much smaller than the standard 8086, so he could only use this method to make them test it. This test was very simple. A simple control circuit could determine the function of the circuit. The company had been purchasing all kinds of equipment for a while, so it was not too easy to find a circuit board that could be tested.
Each of them carried two chips and worked on their own. The one who tested the fastest, a small control circuit, to see different switches and different lights to know if it can be used properly. With a little bit of complexity, along with the ability of some registers to read data and calculate some simple formulas, it was easy to test if the chip really worked.
As for using the microscope to directly look at the circuit, that would be a bit of a problem. After all, it would take a long time to check the 40,000 transistors one by one. However, as long as the first one worked, they wouldn't be checking it at all. More importantly, they were checking how much craftsmanship Guo Tai Lai used. The size of this chip was much smaller than the 8086 they knew. It was a pleasant surprise.
The circuit test was too fast. Basically, in less than half an hour, the basic test showed that this Director Guo 8086 chip had completely achieved the functions of the standard 8086 chip. In this period of time, the technician who was responsible for using the electron microscope to observe the situation had become completely dumbfounded.
They suspected that they had come to a fake company, or that they might already be out of the country. Based on what they knew about the level of chip manufacturing in the country, they still couldn't explain how this chip could do this. Was it the latest technology from INTEL? The latest release of the Pentium 3 chip, was only 0.25 micron, but what did they see now? This 8086 microchip actually reached 50 nanometers, 0.05 microns! It was a process that was five times smaller than that of Pentium!How was this possible? Every technician who read and measured what they saw had an incredible expression on their faces. The first thing that came to mind was that they must have made a mistake. Their eyes were a little blurry, probably because they hadn't been able to sleep well in the new company recently.
Yes, that must be the reason. Otherwise, why would he be confused? Isn't it? Eh? Why was everyone's pressure so great that their eyes were blurry?
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|