Guo Tailai was still smiling bitterly. Hippophae was a little puzzled. He could already pay in instalments, why was his expression still the same?
"About that, I still have another piece of land in Beijing, and I also need to build a company headquarters." Guo Tailai sighed. "We need to build a building here as well as all kinds of high-end laboratories. That's even more expensive."
The Beijing Building and the high-end laboratory; either one of them was not something that could be acquired with a small amount of money. Even the Hippophae felt some sympathy for Guo Tai.
Normally, a real estate project could be loaned. As long as the real estate project was taken down, it would be possible to start the construction of the mortgage. However, Guo Tai Lai didn't want to lend. Without the mortgage rights, it would be too difficult to raise money from a new company that couldn't even see its profitability.It could be said that Guo Tailai was the only one who could support the company in the capital. For the time being, he still relied on the money he had spent on selling the model. Although it looked like it was worth more than $100 million, it was still uncertain how long it would last.
Hippophae knew about the beauty parlor and Guo Tailai's special cosmetic surgery skills, but he couldn't recommend Guo Tailai to be more of a customer. Guo Tailai had to pay the price for every action he took. He must not let Guo Tailai harm his body to earn money.
"Take your time." What else could the Hippophae say? You can only persuade me this way: "How about you try to raise funds from Tin Tung or from them. I believe they will be willing to invest in your company."
"Forget it, this is all I can do. I'll take my time!" Guo Tailai didn't want other people to interfere in his company, so he decided to wait until he couldn't hold on for much longer.Although he couldn't help Guo Tai solve the problem of funding, the Hippophae could still help Guo Tai Lai think of a way to acquire the place called Shu Su. The Xiao Hui volunteered to help Guo Tai Lai coordinate, but Guo Tai could not stop him, and could only nod in agreement.
The materials from Professor Wang were sent to the island one by one. Guo Tai came back to rest for the night, and the next day, he was immersed in the production of components.
All the materials had been placed here for more than 24 hours, which allowed them to adapt to the temperature here without the stress and swelling caused by the temperature difference between the inside and outside. The island's shock-proof ditch walls are complete, and it is definitely the most suitable place for high-precision processing.
Compared to the two large flat plates, the other parts were smaller in size and easy to make. In less than a week, all the parts had been assembled and debugged.
The few subject teams in Professor Wang's laboratory had all moved out, even Second Brother of the dorm, whom they hadn't seen much in two years, was among them. A monster had always been a monster. He was in charge of the electronic control section and had already written a few essays. By the time second brother finished writing the last paper, he would be able to reach the standard of a straight graduate in just two years.
Guo Tai Lai was responsible for assembling the equipment according to the blueprints and coordinating the tolerances. Elder Liu acted as the field instructor. The group of Master doctoral students were all helping out as they carefully moved the parts according to Guo Tailai's request. There were also four Master s who recorded everything according to Guo Tailai's assembly process, and each step had to be meticulously recorded down. It included the speed at which it was lowered from the height, the number of screw nuts that were twisted several times according to the torque, and how much stress was released before being twisted back, and so on.
For each step, Guo and Elder Liu shared their experiences on why they did it, what effect they could achieve, and what part of the error the workpiece had caused and how they needed to adjust the tolerance. Later this detailed assembly manual will be the assembly guide for mass-produced assembly engineers.
On the step motor side was an electrical design, which was also completed by a director along with several doctoral students and Master. The production was also manually assembled by Guo Tailai, and all the assembly records were still detailed to the strength and angle of each action.Lubricants and coolants were developed separately by two professors from the Department of Chemistry and the Department of Mechanics, with low volatile and high purity, and with high mesh sieve filters. Lubrication should be taken into account during installation, and the piping of the matching coolant will be installed.
After assembling these and adjusting the tolerance, Guo Tai Lai followed his second brother's instructions and installed the circuit board. The control program had already run through the simulator hundreds of times. Other than the fact that the accuracy of the simulator's control did not meet the high precision requirements and could not be tested, the rest of the machines had already been simulated. After the control system was installed, the debris was cleaned and the static electricity was released. Only after the unrelated people had all left the room did they give the electric test.Guo thought that the test was just a few subsystem research teams within the school, or even a few lab staff to do the test. At least wait until they passed the test without any problems before reporting to their leader. However, he did not expect the country to place such a newly designed, pure domestically made, ultrhigh precision, five-axis NC Machining Center to such an extent.
Not only did the leaders of the seminal system Department rush over specially, even the few departments of the Chemical Machinery and Electrical Engineering had brought their leaders over. The President Wang was one of them. Not only that, there were also a few leaders from the Information Industry Department. The Chinese Academy of Sciences and the Chinese Academy of Engineering each had a few scholars, and the team's level was shockingly high.
The Professor Wang was the controller and overall planner of the entire project. Most of the theories and designs were part of his idea, but the ones that came true were the Professor Wang and a few of his students. The project of the control system is the responsibility of second brother, so, in the concrete demonstration operation, is still carried out by second brother.
In order to avoid the vibration caused by the operator at close range affecting the machining accuracy, the console is far away from the processing center and is connected by a data line. After the operator had fixed the workpiece properly, he would close the two layers of security doors, and then move away from the processing center.Second Brother sat in front of the console, took a deep breath, and turned on the power switch under the watchful eyes of the leaders of various sizes. The system was switched on. He watched as the screen of the control panel lit up, displaying the interface of the system's self-examination that he had read who knows how many times. He then exhaled softly. So far, at least, so good.
The control system began to activate. The knife and disc began to inspect itself from its initial state. After spinning very smoothly, the wheel and disc with various tools fixed in it entered the standby state. At the same time, the center of the machining shaft had agilely turned a few times before accurately stopping at the center.The system interface displayed a series of information about passing self-examination. Every subsystem self-examination was normal. Afterwards, the system self-examination was completed and the system entered the working interface. "Huu."
"So far, so good." The second brother, who was standing in front of the control board, happily came to this conclusion.
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|