It is precisely because of the military's engineering department that several workshops have been built, so Wang Bin intends to temporarily use these workshops as a rocket research and development base.
As for Jia Jie, although he is not very old, or even very young, his ability is definitely worthy of Wang Bin's trust. Therefore, Wang Bin plans to place Jia Jie in the laboratory as the deputy of the aerospace laboratory. As for the aerospace laboratory, The person in charge of Bian, Wang Bin is going to hand over this matter to Professor Han Minhan, an aerospace expert previously dug from Haida through Professor Dai.
"By the way, Yu Pingping, is this machine tool you developed can be mass-produced?" When Wang Bin and Jia Jie finished talking about Jia Jie's arrangement, he asked Yu Pingping again.
After all, even if Wang Bin has obtained a lot of ultrhigh-precision CNC machine tools through various means from all aspects, but for today's Tiangong Technology, the number of ultrhigh-precision CNC machine tools is still somewhat small, so for ultrhigh precision CNC machine tools. High-precision CNC machine tools are still in great demand.
"Mr. Wang! With the capabilities of our Tiangong Technology, it is not difficult to mass-produce this machine tool. If we do our best, it will not be difficult to produce dozens or hundreds of units per month.
But, Mr. Wang, you have also seen that since the materials used in this machine tool are all high-performance materials produced by Wenming Tiangong Technology itself, the cost is very high. If it is mass-produced, I think the cost is a bit high!
Therefore, even if our machine tool is mass-produced, if we want to sell this machine tool, no one wants it. After all, compared with those big-brand machine tools, our machine tool sells for at least their price. Several times as many, and at the same time, it is far from being compared with them in terms of brand. "After listening to Wang Bin's words, Yu Pingping thought for a while and said.
"No, Yu Pingping, although the cost of this machine tool is somewhat higher than other ultrhigh precision CNC machine tools in the world, don't forget that the materials you use can't be calculated based on market prices. After all, these materials are our own materials, so when put together, the price is not very high for us, and it is even cheaper than the ones purchased from other enemies.
If we do not mass-produce this machine tool, then it means that we need to purchase the same type of ultrhigh precision CNC machine tools, and I think you know how difficult it is to obtain ultrhigh precision CNC machine tools.
At the same time, in terms of time, it is far from being compared with our own. The most important thing is that once the machine tool has a problem, we can only return it to the factory or ask someone to repair it from other sources, but if we have our own machine tool , You don't have to be so troublesome. Even if there is a big problem, we can solve it by ourselves. The time cost here is enough to offset the cost difference of the machine tool.
What's more, I have never thought about selling this machine tool. Even if it is sold, I would like to buy it or not, and it is a big deal that I will use it all by myself.
We Tiangong Technology is not short of money, even if it is at a high price, our Tiangong Technology can fully bear it. "Wang Bin said.
"Mr. Wang! In this case, mass production of this machine is definitely not a big problem. We can send drawings to the workshop for production at any time." Yu Pingping said.
"Okay! Then you will arrange it later and mass-produce this machine tool as soon as possible. After all, our Tiangong Technology's demand for ultrhigh-precision CNC machine tools is too great.
At the same time, for medium and large machine tools, you will also start research and development as soon as possible. Only if we can produce ourselves, our Tiangong Technology will not be controlled by others in this respect, and our country will not be controlled by others in this respect.
And in terms of R&D funds, you don't have to worry, we Tiangong Technology will definitely support your project.
If I expected it well, the military definitely needs ultrhigh-precision CNC machine tools, so even if the price is higher, the military will definitely buy it, and even the amount required is not small. After all, compared to others, The country does not lack such a small amount of money at all. "Wang Bin thought for a while and said.
"Okay! Mr. Wang! I'll make arrangements later." Yu Ping nodded.
After Wang Bin talked to Yu Pingping for a while, he walked out of the mechanical test workshop.
"Professor Poke! How is the situation with the big bypass than the turbofan engine?" When Wang Bin came to the aviation laboratory and found Professor Poke who was busy in the assembly workshop, he asked Professor Poke.
"Mr. Wang! The current situation is not bad. The manufacture of large bypass than turbofan engines is very smooth! According to the current progress, at most one week, the first large bypass turbofan engine of Tiangong Technology can be successfully manufactured. "Professor Poke said.
Wang Bin nodded, and then told Professor Poke that Professor Zhang had developed a new type of super high temperature and high pressure wear-resistant material.
"What? Mr. Wang! This is true, Professor Zhang has really succeeded in research and development!" When Professor Poke heard what Wang Bin said, he became excited at once, because the news that Wang Bin brought was too shocking. Now, as an expert in aeroengines, he clearly knows what it means for them to have the first large bypass turbofan engine with such a super material.
"Yes! Poke Professor, Professor Zhang, they have really successfully developed a super material." Wang Bin confirmed.
Hearing what Wang Bin said, Professor Poke immediately put aside his work, stood up all of a sudden, and said to Wang Bin: "Mr. Wang~www.mtlnovel.com~ Have you brought samples?"
Wang Bin silently took out the materials he had brought from the laboratory and handed it to Professor Poke.
After Professor Poke saw the material that Wang Bin had arrived, he immediately took it without hesitation, and looked at the material carefully. This is a material with metallic luster. From here, it can be seen that this material is A metal alloy material.
At the same time, although the weight of this material is much heavier than that of light materials such as titanium and aluminum, it is almost equivalent to the weight of steel, but in the view of Professor Poke, in terms of the performance of this material, this The weight is completely acceptable.
After watching for a while, Professor Poke immediately got up and took the material into the aviation material testing laboratory and started testing this material. Although Professor Zhang had already tested this material when he was in the material laboratory before, but there was no I saw with my own eyes that Professor Poke really couldn't accept the performance of this material.
Since the test in the aviation materials laboratory is much simpler than that in the materials laboratory, the performance of this material soon appeared in front of Professor Poke. Seeing the data, Professor Poke is even more so. He was so excited that there was even a slight tremor in the whole person, and Professor Poke had to admit that what Wang Bin said was true.
Looking at Professor Poke's slightly trembling body, Wang Bin's face looked a little worried. Professor Poke would fall in the footsteps of Professor Zhang before, and at the same time he thought in his heart that it seemed that the biological gene laboratory would speed up the research and development process. After all, time Don't wait for anyone, if you wait until Professor Piao and they really have some accident and then the research and development succeed, then Wang Bin will really cry and there will be no place to cry.
Chaoshen Technology Trading Mall
Chapter end
Report
|
Donate
Oh o, this user has not set a donation button.
|