Chaoshen Technology Trading Mall Chapter 147

　　 "Yeah!!! It succeeded, we succeeded!!!"

　　 "Great! Unexpectedly, we actually developed a small special copper alloy production line, which is really great!"

　　 When Wang Bin announced the structure of the trial production, Yu Pingping and the others immediately cheered loudly.

And Wang Bin did not stop them. Although this production line is only a small production line, as a special copper alloy production line, the technical content of the entire production line is not low. The most important thing is that there is not too much technology. In the case of using modern electronic equipment, the technical difficulty is even higher, so it is definitely not easy for Yu Pingping to develop this production line.

After a while, after Yu Pingping calmed down, Wang Bin said to Pingping again: "Yu Pingping, now that our production line has been successfully tested, the next step is to install this production line in the workshop. Inside, and officially started mass production. In addition, since this production line is only a small production line, and it is also a production line with a very low degree of automation, your next task is still very heavy.

　　 First of all, in the later production process of this production line, especially in the early stage, you must send people to guide workers to operate this production line and be responsible for improving some of the defects of the production line to make this production line more perfect.

　　 At the same time, you will also design more advanced production lines, such as the degree of automation of the production line, increase the output of the production line, and so on. "

After listening to Wang Bin's words, Yu Pingping nodded. Among them, Yu Pingping said: “Good Mr. Wang! We already have a concrete plan. This afternoon, we will move this production line to Factory No. 5. Although Plant No. 5 is not very large, it is not a problem to put a few small production lines.

At the same time, we have also set up a special team for the follow-up improvement and maintenance of the production line. Although we are only designing and manufacturing such a production line, we will design and produce more and more products and production lines in the future. There must be dedicated personnel to be responsible.

Finally, we have the design of the new production line. In this regard, we also have a complete plan. Next, we are going to design a fully automatic production line with a daily production capacity of about 200 tons. If it succeeds, then we will carry out medium and large production lines. the design of. "

　　 "Yes! But for medium and large production lines, you don't have to worry, take it step by step!" Wang Bin smiled and nodded.

　　 In the afternoon, Wang Bin and Yu Pingping moved the production line to the No. 5 workshop and completed the installation. At the same time, the production line started formal production the next morning.

Of course, because of the copper-based superconducting materials produced on this production line, Wang Bin has not announced yet, and naturally there are no customers. Wang Bin is not in a hurry to announce this. After all, the production line's production capacity is only 80%. Only a ton, coupled with the use of room temperature superconducting materials and the performance of this copper-based room temperature superconducting material, Wang Bin is not afraid that there will be no customers in the future.

Therefore, the copper-based superconducting materials produced by Wang Bin are ready to be stored first. After all, once Wang Bin has established a production line for superconducting batteries, then only the superconducting materials required for superconducting batteries will be very important. huge.

When Wang Bin saw that the production line designed by Yu Pingping had been installed and produced very smoothly, even if there were some minor problems, they were quickly resolved by the professional team established by Yu Pingping. Wang Bin was very concerned about Yu Pingping. The human mechanical R&D and design team also relaxed, turned around and returned to their own laboratory to continue the trial production of the second-generation superconducting battery technology.

Although Wang Bin has been trial-manufacturing the second-generation superconducting battery from the beginning of the year until now, but until now, he has not succeeded once, but it is not that he has gained nothing. Until now, Wang Bin He has successfully overcome many problems and is very close to success.

　　 Wang Bin believes that within a few days, he can definitely successfully manufacture the second-generation copper-based superconducting battery.

　　 Sure enough, just a week after Pingping people successfully developed the production line, Wang Bin also successfully manufactured the first second-generation copper-based superconducting battery, and its performance reached the standard required by the technical data in his mind.

As for the subsequent third-generation copper-based superconducting battery technology, Wang Bin is not ready for trial production for the time being. After all, the second-generation superconducting battery technology has already spent nearly a month and a half for Wang Bin. If you continue to trial-produce the third-generation superconducting battery In terms of battery technology, Wang Bin believes that even if he has a complete superconducting battery technology in his mind, he will not be able to trial-produce it in a short while.

　　 What's more, even the first and second-generation copper-based superconducting batteries have not yet been mass-produced, so there is no need to rush to trial-produce the third-generation technology.

　　The most important thing is that in the current situation of Tiangong Technology, even the first and second generation superconducting batteries are sufficient for their Tiangong Technology.

Of course, manufacturing the first second-generation superconducting battery does not mean that it can be mass-produced. After all, this is only a laboratory trial production. If you want to mass-produce, you must have a corresponding production line, but good In the production line technology, he also has it in his mind, and at the same time, it is not too difficult in terms of technology.

The most important thing is that Wang Bin does not need to build a car behind closed doors in the laboratory by himself in terms of the production line. It is entirely possible for Yu Pingping to carry out R&D and production together~www.mtlnovel.com~ After all, Tiangong Technology already has mechanical R&D. team.

　　 And the production line technology is not afraid of being known, because even if someone else gets the production line, what can they do? Without the copper-based normal temperature superconducting material, it is impossible to produce any volumetric superconducting battery!

　　 So after Wang Bin completed the trial production of the second-generation superconducting battery technology, he walked out of his laboratory and returned to his office, ready to go to Yu Pingping's mechanical research and development workshop tomorrow to prepare for the development of the production line.

　　 However, before Wang Bin returned to his office, the cell phone in his pocket rang.

　　 Wang Bin picked up the mobile phone in his hand and found out that it was the phone call from the professor at the R&D laboratory.

So Wang Bin could not wait to pick it up, and his heart was vaguely excited. He knew that under normal circumstances, the Aviation Development Laboratory on their side would not call him unless there was something. They will call Wang Bin only for important events or problems.

At the same time, he had learned from Professor Piao a few days ago that the accessories for the aviation development have been manufactured. Professor Piao and they are inspecting these parts one by one. If there is no accident, they will be in these two days. Assembling, so after receiving the call from Professor Poke, Wang Bin began to look forward to it. It is very possible that the aero engine has been successfully manufactured with the efforts of Professor Poke and others!

　　 Please remember the domain name of the book's first publication:. The fastest mobile version update URL:

Chapter end