Chaoshen Technology Trading Mall Chapter 250

So Wang Bin immediately turned around and walked in towards the mechanical test workshop.

"Mr. Wang, we succeeded. We finally successfully developed an ultrhigh-precision CNC machine tool, which is still an ultrhigh-precision CNC machine tool with a precision of 0.001 microns. The most important thing is that this machine tool is completely designed and manufactured by ourselves. "Yes." When Wang Bin walked into the workshop, he was seen by Yu Pingping who had just been at the entrance of the workshop, so he immediately said to Wang Bin excitedly.

"What? Ultrhigh-precision CNC machine tools, did you develop them?" When Wang Bin heard what Yu Pingping said, he was also taken aback. You must know that a few months ago, Yu Pingping said that they would develop ultrhigh-precision CNC machine tools. At the time, Wang Bin also agreed to Yu Pingping with an indifferent attitude, and he also gave some help, but this help was not a drawing, but only in terms of funds and manpower.

However, Wang Bin did not have much expectation for this project of Yu Pingping. After all, without Wang Bin, he bought drawings from the system, relying only on Yu Pingping themselves to successfully develop ultrhigh-precision CNC machine tools. It seemed to Wang Bin that this was simply impossible.

However, the facts are often unexpected. He never thought that Yu Pingping could really develop ultrhigh-precision time machine tools.

"This! Is this true?" Until this time, Wang Bin still couldn't believe it.

So he immediately looked into the workshop. Sure enough, there was a machine tool in the workshop. However, the size of this machine tool was not large. The maximum working area of ​​its workbench was definitely not more than 1,000 mm, so if you follow In terms of machine type, this machine should be a small machine.

Seeing this, Wang Bin immediately stepped forward and looked at the machine carefully. This machine has the materials used in the ultrhigh-precision small machine tool developed by Yu Pingping. Wang Bin is no stranger to him, except for some electronics. Except for the components, the others are basically materials developed by Wang Bin and Tiangong Technology themselves.

For example, the ball screw of the machine tool is made of special glass of Tiangong Technology, and the bed of the machine tool and some castings are all made of special glass. In addition, some of the machine tools are subject to special glass. The force parts and wear parts are made of special bearing steel of Tiangong Technology. After a rough estimate, Wang Bin found that the cost of this machine tool is really incredible, and its cost is at least several times that of the same level machine tool. More, after all, whether it is special glass or special bearing steel, its cost is not low, at least not comparable to those of gray iron.

After looking at it for a while, Wang Bin found that this machine was still a five-axis CNC machine tool, which was even more out of Wang Bin's expectation. You must know that this is a high-precision five-axis CNC machine! Even if it is placed internationally, few countries can manufacture it, but such a five-axis machine tool was manufactured by Yu Pingping.

"Yes, let's be honest, Yu Pingping and Jia Jie, you are really out of my expectations. Originally, I thought that you wanted to develop ultrhigh-precision CNC machine tools on your own. At that time, it was basically impossible. Things.

Even if some results can be developed, the precision can only be about the same as that of ordinary precision machine tools. At the same time, the ability to develop three-axis machine tools is already very impressive.

Unexpectedly, you actually developed a machine tool with a precision of 0.001 microns, which is good, really good! "Wang Bin said happily.

"Mr. Wang! To tell the truth, we just rushed to the three-axis high-precision CNC machine tool before. After all, we know our own level, but when we applied to Mr. Wang for research and development funds, Mr. Wang did not Any hesitation directly gave us several times the amount of funds we needed. In addition, many of our internal equipment in Tiangong Technology is the world's top equipment, including those in our precision machining workshop.

It is with this in mind that we bit our heads and simply developed a five-axis CNC directly.

However, the difficulty of developing this machine tool is somewhat beyond our expectations. After all, this is also an ultrhigh precision five-axis CNC machine tool!

So we tried our best and even got in touch with our mentor when we were in university. Finally, with the help of our mentor, we solved these difficulties one by one, and finally developed the machine in front of us. "Yu Pingping was a little grateful while he was excited, because he knew very well that without the inexhaustible investment of Tiangong Technology, without the help of his mentor, he would not be able to develop this machine tool.

"Although the funds of our Tiangong Technology and the help of your mentor are indeed very helpful in the development of this machine tool, the success of this machine tool is also inseparable from your own efforts. Oneself is the biggest hero.

At the same time, I also very much believe that if you can develop this machine tool, then you will be able to develop larger and more precise machine tools in the future. "Wang Binping regained his excitement and said affirmatively to Yu Pingping.

After listening to Wang Bin's words, Yu Pingping, Jia Jie and others were even more excited.

Yu Pingping calmed down a bit after knowing it for more than ten minutes.

At this moment, Yu Pingping suddenly thought of something and said to Wang Bin; “Mr. Wang, I heard my mentor say that after a while, he will retreat to the second line, so I want to invite my mentor to our Tiangong. Science and technology, UU reading www.uukanshu.com don't know what you think of Mr. Wang?"

"What! That's a great thing! It just so happens that there is no person in charge of the general direction in your mechanical laboratory. It is so good that your tutor can come to be responsible for the work of your mechanical laboratory.

As for you, Jia Jie and others, I will ask you to stay here in the mechanical laboratory, and Jia Jie, I am going to transfer him to other laboratories to add some burden to him. "Wang Bin said.

As for what the burden Wang Bin said, in fact, it doesn't need to be said by Wang Bin. Both Yu Pingping and Jia Jie know that it is the Aerospace Laboratory.

Because as early as when the rocket launch site and the rocket laboratory project started, Wang Bin had already come over to talk to them, and asked their opinions at the time, but because Yu Pingping was not very confident in himself, or Said that he didn't have any experience and knowledge about the research and development of rockets, so he decided to stay in the mechanical laboratory in the end.

But Jia Jie is different. Although Jia Jie said that when he was in college, the major he focused on was also a major in mechanics, but because he was also very interested in aerospace, he also had some achievements in rockets. Now Wang Now that Bin had given him this opportunity, Jia Jie certainly wouldn't refuse, so he agreed on the spot.

Although the construction of the rocket launch site has not been completed, after all, such a large project will not be completed in a short time. However, the military's engineering unit is not comparable to the civilian engineering team. It starts with the project. Up to now, in just such a short time, they have not only built several factories, but even the first barren mountain, which has been removed by half by the Engineering Department.

Chaoshen Technology Trading Mall

Chapter end